Suspension Lowering Kit Mercedes-Benz E-CLASS Coupe (C124)
Car
Tech specs
Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.
Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.
Product notes
Mounting instructions for W201/202/123/124/126: Max. lowerering is obtained by using single points (single stud) spring rubber bases on the front and rear axles. In case, the 3 point or 4 point rubber bases installed by the manufacturer have to be exchanged accordingly (spare part available from DB agents) in case of corresponding accessories, as automatic shifting, air conditioning etc. However on the front the 3 point or 4point rubber bases must always be used in case of trailer operation (trailer couping) on the rear axle, 3 point rubber basses must always be used.
109 - In case of additional, non-standard equipment (e.g. tow hook, LPG installation) the actual lowering of the car might be different from declared.124 - W zestawie znajdują się wyłącznie amortyzatory oraz sprężyny obniżające. Pozostałe części montażowe, które są niezbędne do instalacji, nie są składnikami kompletu. Należy je przełożyć z fabrycznych elementów bądź zakupić je osobno.Product description
Suspension Lowering Kit Mercedes-Benz E-CLASS Coupe (C124)
Suspension Lowering Kit MTS Technik for Mercedes-Benz E-CLASS Coupe (C124), lowering both axles by 45 mm.. Dedicated for the years of: 06/93 - 06/97, for the engine version: E 200 (124.040) / E 220 (124.042).
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
The same lowering for both axles maximizes driving precision and guarantees a sporty look without sacrificing comfort.