MTS-Technik Safe Shopping
  • COILOVER SPRINGS SUPPLIER
  • TÜV APPROVAL
  • DESIGNED AND ASSEMBLED IN EU
  • 40 DAYS RETURN POLICY
  • FAST SHIPPING
Language and currency:
en | €
Country of collecting the order:
Poland
0,00 €
Razem:0,00 € Go to basket
Delivery cost from0,00 €
Suspension Lowering Kit Volkswagen T-ROC (A11/D11)
Suspension Lowering Kit Volkswagen T-ROC (A11/D11)
Suspension Lowering Kit Volkswagen T-ROC (A11/D11)

Suspension Lowering Kit Volkswagen T-ROC (A11/D11)

Part number: MTSKPLVW550
404,00 €
incl. VAT / set
-
+
of
Product on order
Contact the shop staff, in order to estimate time of preparing this product for shipment.
40 days returns
Direct from the producer
2 years warranty
Secure payments

Car

MakeVolkswagenModelT-ROC (A11/D11)TypeA11, D11Engine1.6 TDIYear07/15 -

Tech specs

Max. Axle Load FA

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

-Max. Axle Load RA

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

-Lowering35/40 mmInfotorsion beamTUV Certificateno

Product notes

M13 - Not suitable for 4WD (four-wheel drive) cars.M75 - Springs not suitable for cars with multilink rear suspension.M86 - About 15mm less lowering for vehicles with sport suspension.M87 - Springs only suitable for vehicles with torsion-beam axle.109 - In case of additional, non-standard equipment (e.g. tow hook, LPG installation) the actual lowering of the car might be different from declared.124 - The set includes only shock absorbers and lowering springs. Other assembly parts that are necessary for installation are not included in the set. They must be transferred from the factory elements or purchased separately.

Product description

Suspension Lowering Kit Volkswagen GOLF VIII Variant (CG5)

Suspension Lowering Kit MTS Technik for Volkswagen GOLF VIII Variant (CG5), lowering both axles by 45 mm.. Dedicated for the years of: 12/20 -, for the engine version: 1.5 eTSI.

pixel