MTS-Technik Safe Shopping
  • COILOVER SPRINGS SUPPLIER
  • TÜV APPROVAL
  • DESIGNED AND ASSEMBLED IN EU
  • 40 DAYS RETURN POLICY
  • FAST SHIPPING
Language and currency:
en | €
Country of collecting the order:
Poland
0,00 €
Suspension Lowering Kit Volkswagen JETTA III (1K2)
Suspension Lowering Kit Volkswagen JETTA III (1K2)
Suspension Lowering Kit Volkswagen JETTA III (1K2)
Suspension Lowering Kit Volkswagen JETTA III (1K2)

Suspension Lowering Kit Volkswagen JETTA III (1K2)

Part number: MTSKPLVW270

Parametr wyróżniający
Size
universal
351,00 €
incl. VAT / set
-
+
of
Hurry! – only few left in stock.
Hurry! – only few left in stock.
40 days returns
Direct from the producer
2 years warranty
Secure payments
Fast shipping

Car

MakeVolkswagenModelJETTA III (1K2)Type1K2Engine2.0 TDI / 2.0 TDI 16VYear2005 - 09/10

Tech specs

Max. Axle Load FA

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

-Max. Axle Load RA

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

-Lowering40/40 mmInfostrut diameter at the front axle of 50 mmTUV CertificateyesDownload GPSR brochureDownload GPSR brochureDownload GPSR stickerDownload GPSR stickerTUV CertificateTUV Certificate

Product notes

85 - The lowering rate indicated in this catalogue will be less in case of stock sport suspension or stock lowering.89 - Without NIVO.93 - Not suitable for 4x4 models.109 - In case of additional, non-standard equipment (e.g. tow hook, LPG installation) the actual lowering of the car might be different from declared.124 - W zestawie znajdują się wyłącznie amortyzatory oraz sprężyny obniżające. Pozostałe części montażowe, które są niezbędne do instalacji, nie są składnikami kompletu. Należy je przełożyć z fabrycznych elementów bądź zakupić je osobno.

Product description

Suspension Lowering Kit Volkswagen JETTA III (1K2)

Suspension Lowering Kit MTS Technik for Volkswagen JETTA III (1K2), lowering both axles by 40 mm.. Dedicated for the years of: 2005 - 09/10, for the engine version: 2.0 TDI / 2.0 TDI 16V.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
The same lowering for both axles The same lowering for both axles maximizes driving precision and guarantees a sporty look without sacrificing comfort.

Matches to

BrandModelEngineYear
pixel