MTS-Technik Safe Shopping
  • COILOVER SPRINGS SUPPLIER
  • TÜV APPROVAL
  • DESIGNED AND ASSEMBLED IN EU
  • 40 DAYS RETURN POLICY
  • FAST SHIPPING
Suspension Lowering Kit Volkswagen GOLF III (1H1)
Suspension Lowering Kit Volkswagen GOLF III (1H1)
Suspension Lowering Kit Volkswagen GOLF III (1H1)
Suspension Lowering Kit Volkswagen GOLF III (1H1)

Suspension Lowering Kit Volkswagen GOLF III (1H1)

Part number: MTSKPLVW465

Parametr wyróżniający
349,00 €
incl. VAT / set
-
+
of
Product on order
Product on order
40 days returns
Direct from the producer
2 years warranty
Secure payments

Car

MakeVolkswagenModelGOLF III (1H1)Type1H1Engine1.6 / 1.8 / 1.9 D / 1.9 SDI / 1.9 TD, GTD / 1.9 TDI / 2.0 / 2.0 GLYear09/91 - 08/94

Tech specs

Max. Axle Load FA

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

-Max. Axle Load RA

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

-Lowering60/60 mmTUV CertificateyesDownload GPSR brochureDownload GPSR brochureDownload GPSR stickerDownload GPSR stickerTUV CertificateTUV Certificate

Product notes

75 - These lowering springs can only be used with shortened shock absorbers.M13 - Not suitable for 4WD (four-wheel drive) cars.M18 - For cars from 10/93, it may be necessary, due to different spring holder sizes on the front axle, to use the original spring holder (Art.No.1HO-412-341).109 - In case of additional, non-standard equipment (e.g. tow hook, LPG installation) the actual lowering of the car might be different from declared.124 - W zestawie znajdują się wyłącznie amortyzatory oraz sprężyny obniżające. Pozostałe części montażowe, które są niezbędne do instalacji, nie są składnikami kompletu. Należy je przełożyć z fabrycznych elementów bądź zakupić je osobno.

Product description

Suspension Lowering Kit Volkswagen GOLF III (1H1)

Suspension Lowering Kit MTS Technik for Volkswagen GOLF III (1H1), lowering both axles by 60 mm.. Dedicated for the years of: 09/91 - 08/94, for the engine version: 1.6 / 1.8 / 1.9 D / 1.9 SDI / 1.9 TD, GTD / 1.9 TDI / 2.0 / 2.0 GL.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
The same lowering for both axles The same lowering for both axles maximizes driving precision and guarantees a sporty look without sacrificing comfort.

Matches to

BrandModelEngineYear
pixel