Suspension Lowering Kit MTS Technik Alfa Romeo 156 (932)
Car
Tech specs
Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.
Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.
Comments
While used in a car equipped with NIVO the stock NIVO shock absorbers will be exchanged with sport shock absorbers included in the set (this remark is valid only for sport suspension kits). While deciding only for lowering springs the installment will be possible only after exchanging the stock rear shock absorbers with MTSAL001R. There is a possibility to buy springs just for the front axle (60% of the sets value) - in such case no additional changes are required.
109 - In case of additional, non-standard equipment (e.g. tow hook, LPG installation) the actual lowering of the car might be different from declared.124 - The set includes only shock absorbers and lowering springs. Other assembly parts that are necessary for installation are not included in the set. They must be transferred from the factory elements or purchased separately.Download materials
Product description
Suspension Lowering Kit MTS Technik Alfa Romeo 156 (932)
Suspension Lowering Kit MTS Technik for Alfa Romeo 156 (932), lowering both axles by 25 mm.. Dedicated for the years of: 10/97 - 09/05, for the engine version: 1.6 16V T.SPARK (932.A4, 932.A4100) / 1.6 16V T.SPARK (932A4) / 1.8 16V T.SPARK (932.A3) / 1.8 16V T.SPARK (932.A3100) / 1.9 JTD (932.A2B00) / 1.9 JTD (932.A2B00, 932.A2C00) / 1.9 JTD (932.AXN00, 932.BXE00) / 1.9 JTD (932AXE00) / 1.9 JTD (932B2) / 1.9 JTD 16V (932AXE00) / 2.0 16V T.SPARK (932A2) / 2.0 16V T.SPARK (932A21__) / 2.0 JTS (932AXA) / 2.0 JTS (932AXD00, 932AXD01).
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
The same lowering for both axles maximizes driving precision and guarantees a sporty look without sacrificing comfort.