MTS-Technik Safe Shopping
  • TÜV APPROVAL
  • DESIGNED AND ASSEMBLED IN EU
  • COILOVER SPRINGS SUPPLIER
  • 40 DAYS RETURN POLICY
  • FAST SHIPPING
Safe shopping
Idosell security badge
Coilover Kit Street Seat LEON ST (5F)
Coilover Kit Street Seat LEON ST (5F)
Coilover Kit Street Seat LEON ST (5F)
Coilover Kit Street Seat LEON ST (5F)
Coilover Kit Street Seat LEON ST (5F)
Coilover Kit Street Seat LEON ST (5F)

Coilover Kit Street Seat LEON ST (5F)

Part number: MTSGWVW53
Part number (old): 61590025

599,00 €Lowest price in 30 days before discount(Discount 10% when buying in a set)
539,10 €
incl. VAT / set
-
+
of
Hurry! – only few left in stock.
Hurry! – only few left in stock.
40 days return policy
Straight from the manufacturer
2 years warranty
Secure payments

car

MakeSeatModelLEON ST (5F)Type5F8Engine1.6 TDI 4Drive / 1.8 TSI 4Drive / 2.0 Cupra 4Drive / 2.0 TDI 4Drive / 2.0 TSI 4DriveYear08/13 -

TECH SPECS

SeriesStreetHousinggoldMax. Axle Load FA

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

1081 - 1180 kgMax. Axle Load RA

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

-1110 kgLowering FA35 - 70 mmLowering RA35 - 70 mmCamber / top mount FAnoCamber / top mount RAnoCoilover Main Spring (Front)Spring rate (30 - 55 N/mm)Coilover Main Spring (Rear)Spring rate (80 N/mm)Coilover Helper Spring (Rear)Spring rate (20 N/mm)Infomultilink rear suspensionTUV CertificateyesDownload information brochureDownload information brochureDownload installation manualDownload installation manualDownload TUV CertificateDownload TUV Certificate

PRODUCT NOTES

3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.35 - Rear thread adjustment block is mounted on the top.39 -

Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.

52 - Only suitable for multilink suspension.70 - Not for GTE.73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.

Description

Coilover Kit Seat LEON ST (5F)

Coilover Kit MTS Technik for Seat LEON ST (5F), lowering both axles between 35 - 70 mm. Dedicated for the years of: 08/13 -, for the engine version: 1.6 TDI 4Drive / 1.8 TSI 4Drive / 2.0 Cupra 4Drive / 2.0 TDI 4Drive / 2.0 TSI 4Drive.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.

MATCHES TO

MakeModelEngineYear
pixel