MTS-Technik Safe Shopping
  • COILOVER SPRINGS SUPPLIER
  • TÜV APPROVAL
  • DESIGNED AND ASSEMBLED IN EU
  • 40 DAYS RETURN POLICY
  • FAST SHIPPING
Language and currency:
en | €
Country of collecting the order:
Poland
0,00 €
Coilover Kit Street Hyundai i30 (PD)
Coilover Kit Street Hyundai i30 (PD)
Coilover Kit Street Hyundai i30 (PD)
Coilover Kit Street Hyundai i30 (PD)
Coilover Kit Street Hyundai i30 (PD)
Coilover Kit Street Hyundai i30 (PD)
Coilover Kit Street Hyundai i30 (PD)
Coilover Kit Street Hyundai i30 (PD)
Coilover Kit Street Hyundai i30 (PD)
Coilover Kit Street Hyundai i30 (PD)

Coilover Kit Street Hyundai i30 (PD)

Part number: MTSGWKI03

Size
universal
699,00 €
incl. VAT / set
-
+
of
Hurry! – only few left in stock.
Hurry! – only few left in stock.
40 days returns
Direct from the producer
2 years warranty
Secure payments
Fast shipping

Car

MakeHyundaiModeli30 (PD)TypePDE, PD, PDENEngine1.0 T-GDI / 1.0 T-GDI hybrid 48V / 1.4 MPI / 1.4 T-GDI / 1.5 / 1.5 T-GDI hybrid 48V / 1.6 CRDi / 1.6 CRDi hybrid 48VYear11/16 -

Tech specs

SeriesStreetHousinggoldMax. Axle Load FA

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

-1050 kgMax. Axle Load RA

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

-1000 kgLowering FA20 - 45 mmLowering RA20 - 40 mmCamber / top mount FAnoCamber / top mount RAnoTUV CertificatenoDownload GPSR brochureDownload GPSR brochureDownload GPSR stickerDownload GPSR stickerDownload information brochureDownload information brochureDownload installation manualDownload installation manual

Product notes

3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).8 - Not for 4x4.21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.35 - Rear thread adjustment block is mounted on the top.39 -

Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.

Product description

Coilover Kit Hyundai i30 (PD)

Coilover Kit MTS Technik for Hyundai i30 (PD), lowering the front axle between 20 - 45 mm, and rear between 20 - 40 mm. Dedicated for the years of: 11/16 -, for the engine version: 1.0 T-GDI / 1.0 T-GDI hybrid 48V / 1.4 MPI / 1.4 T-GDI / 1.5 / 1.5 T-GDI hybrid 48V / 1.6 CRDi / 1.6 CRDi hybrid 48V.

Matches to

BrandModelEngineYear
pixel