Coilover Kit Street BMW 3 Touring (E46)
MakeBMWModel3 Touring (E46)TypeE46Engine316 i / 318 d / 318 i / 320 d / 320 i / 325 i / 328 i / 330 d / 330 iYear06/99 - 07/05
SeriesStreetHousinginoxMax. Axle Load FA
Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.
-1030 kgMax. Axle Load RA
Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.
-1215 kgLowering FA40 - 90 mmLowering RA20 - 65 mmCamber / top mount FAyesCamber / top mount RAyesCoilover Main Spring (Front)Spring rate (70 N/mm)Coilover Helper Spring (Front)Spring rate (20 N/mm)Coilover Main Spring (Rear)Spring rate (200 N/mm)Coilover Helper Spring (Rear)Spring rate (5,66 N/mm)Infoset includes stabilizer linksTUV CertificatenoDownload installation manualDownload installation manual 3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).8 - Not for 4x4.11 - Stabiliser bars included.21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.33 - Including M-Technik.73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
Coilover Kit BMW 3 Touring (E46)
Coilover Kit MTS Technik for BMW 3 Touring (E46), lowering the front axle between 40 - 90 mm, and rear between 20 - 65 mm. Dedicated for the years of: 06/99 - 07/05, for the engine version: 316 i / 318 d / 318 i / 320 d / 320 i / 325 i / 328 i / 330 d / 330 i.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
The camber plates allow the wheel angle adjustment and increase the precision of driving.
A complete set ready for assembly, also including sway bar links, adapted for lowering.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.