Coilover Kit Skoda Octavia II Sedan
Coilover Kit MTS Technik for Skoda Octavia II Sedan, lowering the front axle between 20 - 50 mm, and rear between 25 - 50 mm. Dedicated for the years of: 02/04 - 06/13, for the engine version: 1.2TSI / 1.4 / 1.4TSI / 1.6 / 1.6 LPG / 1.6FSI / 1.8TSI / 1.8TFSI / 2.0FSI / 2.0RS / 1.6TDI / 1.9TDI / 2.0TDI.








Make | Skoda |
Model | Octavia II Sedan |
Type | 1Z3 |
Engine | 1.2TSI / 1.4 / 1.4TSI / 1.6 / 1.6 LPG / 1.6FSI / 1.8TSI / 1.8TFSI / 2.0FSI / 2.0RS / 1.6TDI / 1.9TDI / 2.0TDI |
Year | 02/04 - 06/13 |
Series: | Sport |
Max. Axle Load FA:![]() Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car. | 1035 kg |
Max. Axle Load RA:![]() Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car. | 1150 kg |
Lowering FA: | 20 - 50 mm |
Lowering RA: | 25 - 50 mm |
Coilover Main Spring (Front): | Spring rate (34 - 40 - 70 N/mm) ,
Spring rate (80 N/mm) |
Coilover Helper Spring (Rear): | Spring rate (20 N/mm) |
TUV Certificate: | yes |
Product Notes: | 3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear). ,
7 - If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request! ,
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower. ,
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers. ,
25 - In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering. |
Download instruction: | Download instruction |
Download installation manual: | Download installation manual |
Download TUV Certificate: | Download TUV Certificate |
In a set
- Coilover Suspension Sport - MTSGWVW30-SPrice: 599,00 € / set
