MTS-Technik Safe Shopping
Coilover Kit Sport Seat Leon II (1P1)
Coilover Kit Sport Seat Leon II (1P1)
Coilover Kit Sport Seat Leon II (1P1)
Coilover Kit Sport Seat Leon II (1P1)
Coilover Kit Sport Seat Leon II (1P1)
Coilover Kit Sport Seat Leon II (1P1)
Coilover Kit Sport Seat Leon II (1P1)
Coilover Kit Sport Seat Leon II (1P1)

Coilover Kit Sport Seat Leon II (1P1)

  • Coilover Kit Sport MTS Technik for Seat Leon II (1P1), lowering the front axle between 20 - 50 mm, and rear between 25 - 50 mm.
Part number: 71590012
Part number (old): MTSGWVW30-S
Seat | Leon II (1P1) | Coilover Kits I Sport || Seat | Leon II (1P1) | Coilover KitsSeat | Leon II (1P1) | Coilover Kits I Sport || Seat | Leon II (1P1) | Coilover Kits
599,00 €
set
You save 0.00% (0.00) when buying in a set.
Sales unit: set

Coilover Kit Seat Leon II (1P1)

Coilover Kit MTS Technik for Seat Leon II (1P1), lowering the front axle between 20 - 50 mm, and rear between 25 - 50 mm. Dedicated for the years of: 05/05 - 12/13, for the engine version: 1.2TSI / 1.4TSI / 1.6 / 1.6 LPG / 1.8TSI / 2.0FSI / 2.0TFSI / 2.0 Cupra R / 1.6TDI / 1.9TDI / 2.0TDI.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
Users reviews
Car:
Make
Seat
Model
Leon II (1P1)
Type
1P1
Engine
1.2TSI / 1.4TSI / 1.6 / 1.6 LPG / 1.8TSI / 2.0FSI / 2.0TFSI / 2.0 Cupra R / 1.6TDI / 1.9TDI / 2.0TDI
Year
05/05 - 12/13
Tech specs:
Series:Sport
Max. Axle Load FA:

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

1035 kg
Max. Axle Load RA:

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

1150 kg
Lowering FA:
20 - 50 mm
Lowering RA:
25 - 50 mm
TUV Certificate:
yes
Download instruction:Download instruction
Download installation manual:Download installation manual
Download TUV Certificate:Download TUV Certificate
Product Notes
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
7 - If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request!
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
25 - In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.

In a set

Matches to

Zamknij
Jplayer

We care about your privacy

Our Shop and our Trusted Partners process your personal data collected on the Internet, e.g. your device's IP address and information saved using tracking and storage technologies such as cookies, web beacons or other similar technologies.

Cookies are using to provide services in accordance with Privacy Policy, as well as for analytical and marketing purposes, and to adjustment the content to your preferences and interests, including displaying personalized (advertising) content and for the proper functioning of the website. You can define the conditions for storing or accessing cookies in your browser.

By clicking "I AGREE, I WANT TO GO TO THE WEBSITE" you consent to the use of cookies in accordance with your browser settings and to adjustment the content on our Shop's website to your preferences, as well as for statistical and marketing purposes, including displaying personalized (advertising) content. You can withdraw your consent at any time by deleting cookies from your browser from a given end device.

If you click "I DO NOT AGREE" - you will not be able to access the Shop website.

I DO NOT AGREE
I AGREE, I WANT TO GO TO THE WEBSITE
pixel