Coilover Kit Comfort Audi A4 B5 Sedan

Coilover Kit Comfort MTS Technik for Audi A4 B5 Sedan, lowering the front axle between 40 - 90 mm, and rear between 20 - 80 mm.

Part Number: MTSGWAU40-C

Parametr wyróżniający:

Size:

549,00 €

You save 0.00% (0.00€) when buying in a set.

Sales unit: set

Quantity:

Coilover Kit Comfort Audi A4 B5 Sedan

Coilover Kit Comfort MTS Technik for Audi A4 B5 Sedan, lowering the front axle between 40 - 90 mm, and rear between 20 - 80 mm. Dedicated for the years of: 11/94 - 09/01, for the engine version: 1.8 Quattro / 1.8T Quattro / 2.4 Quattro / 2.6 Quattro / S4 Quattro / 2.8 Quattro / 1.9TDI Quattro / 2.5TDI Quattro.

High quality confirmed by a 2-year warranty without a mileage limit.

Suspension components characterized by increased corrosion resistance and made of the highest quality materials.

The use of twin-tube technology guarantees stable shock absorber performance.

Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

Anti-corrosion protection yellow galvanized

Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.

Coilover springs made by Eibach, the world leader in the sport springs industry.

Users reviews

To rate this product or to add a new review, you need to log in.

Car:

Make	Audi
Model	A4 B5 Sedan
Type	8D2
Engine	1.8 Quattro / 1.8T Quattro / 2.4 Quattro / 2.6 Quattro / S4 Quattro / 2.8 Quattro / 1.9TDI Quattro / 2.5TDI Quattro
Year	11/94 - 09/01

Tech specs:

Series:	Comfort
Max. Axle Load FA: Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.	1080 kg
Max. Axle Load RA: Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.	1130 kg
Lowering FA:	40 - 90 mm
Lowering RA:	20 - 80 mm
Instruction:	Instruction
Installation manual:	Installation manual

Product Notes

1 - When the adjustable spring seat is set too low according the catalogue, all guarantuees will be withdrawn.

2 - Front and rear axle height adjustable (threaded shock absorber housing).

21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.