100 DAYS RETURNS

FAST SHIPPING

MTS-Technik Safe Shopping
Coilover Kit Street Audi TT 8J Roadster

Coilover Kit Street Audi TT 8J Roadster

  • Coilover Kit Street MTS Technik for Audi TT 8J Roadster, lowering the front axle between 20-50 mm, and rear between 25-50 mm.
Part Number: MTSGWVW30
399,00 €
set
You save 0.00% (0.00) when buying in a set.
Sales unit: set

Coilover Kit Street Audi TT 8J Roadster

Coilover Kit Street MTS Technik for Audi TT 8J Roadster, lowering the front axle between 20-50 mm, and rear between 25-50 mm. Dedicated for the years of: 08/06 - 06/14, for the engine version: 1.8TFSI / 2.0TFSI.

Eibach springs Coilover Kit includes springs made by Eibach, the world leader in the sports springs industry.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
2 years warranty High quality confirmed by a 2-year warranty without a mileage limit.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Users reviews
Car:
Make
Audi
Model
TT 8J Roadster
Type
8J
Engine
1.8TFSI / 2.0TFSI
Year
08/06 - 06/14
Tech specs:
Series:Street
Max. Axle Load FA:

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

965 kg
Max. Axle Load RA:

rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

1150 kg
Lowering FA:
20 - 50 mm
Lowering RA:
25 - 50 mm
Instruction:Instruction
Installation manual:Installation manual
TUV Certificate:TUV Certificate
Product Notes
1 - When the adjustable spring seat is set too low according the catalogue, all guarantuees will be withdrawn.
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
7 - If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request!
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
25 - In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
35 - Rear thread adjustment block is mounted on the top.

In a set

Matches to

Zamknij
Jplayer
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
I DO NOT AGREE
I AGREE, I WANT TO GO TO THE WEBSITE
pixel